FIAT Stilo User Manual

Page 19

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

If the doors, bonnet and boot are shut
correctly and the control signal is repeat-
ed, the system self-diagnostics has de-
tected a system operating fault. It is there-
fore necessary to contact Fiat Dealership.

IMPORTANT When operating the cen-
tral door locking with the metal insert A-
fig. 14 of the key, the alarm is not acti-
vated.

IMPORTANT The electronic alarm is built
in compliance with the law and regulations
of the different countries.

HOW TO DEACTIVATE
THE ALARM

Press button

of the key with remote

control.

The system will react as follows (with the
exception of certain markets):
❒ two brief flashes of the direction indi-

cators;

❒ two brief “beeps”;
❒ door unlocking.
IMPORTANT Operating the central door
locking with the metal insert of the key
will not deactivate the alarm.

VOLUMETRIC PROTECTION
SENSORS

The volumetric sensors are inside the
front ceiling light in the passenger’s com-
partment. To make sure that the volu-
metric sensors are working properly,
check that doors, boot, bonnet, windows
and Skywindow (where provided) are
shut.

Volumetric protection
deactivation

If it is necessary to switch on the alarm
when animals or people are in the car,
press button A-fig. 15 on the front ceil-
ing light to deactivate the volumetric pro-
tection.

Deactivation is needed also in the pres-
ence of additional independent heater and
when it is switched on with the remote
control.

Protection cut-out stays on until activat-
ing the central door opening again.

fig. 14

F0C0335m

fig. 15

F0C0286m