FIAT Stilo User Manual

Page 124

123

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

Group 1

For proper mounting proceed as follows:
❒ move the rear sliding seat fully back-

wards with the seat back at 4

position,

as shown in fig. 16;

❒ check whether the release lever B-

fig. 17 is at rest position (inward);

❒ find the presetting brackets A, then po-

sition the child restraint system with
the fastening devices C aligned with the
brackets;

❒ push the child restraint system until

hearing locking clicks;

❒ for seats positioned facing the running

direction, hook the upper belt D-
fig. 18 (in the upper seat pocket) to the
ring E in the boot;

❒ Check proper locking by moving the

child’s seat with force: the built-in safe-
ty mechanism actually inhibits improp-
er coupling with only one coupling
locked.

With this configuration, the child is se-
cured also by the car seat belts and by the
upper belts. To apply car seat belts to
child’s seat refer to the child’s seat hand-
book.

fig. 17

F0C0139m

fig. 18

F0C0428m

In case of rear sliding seat,
move the front seat forward

to a position from half its stroke forth.

WARNING