FIAT Nuovo Doblo' Panorama User Manual

Page 68

KNOW

YOUR

VEHICLE

SAFETY

STARTING

AND

DRIVING

WARNING

LIGHTS AND

MESSAGES

IN AN

EMERGENCY

SERVICING

AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX

Each movement of the lever will correspond to a slight re-
duction in speed of about 1 km/h, while keeping the lever
held downwards will correspond to a continuous speed
reduction.

Switching the device off

The device can be switched off by the driver in the fol-
lowing ways:
❒ turning the twist switch A to the OFF position;
❒ switching off the engine.

Deactivating the function

The device can be de-activated by the driver in the fol-
lowing ways:
❒ pressing the brake pedal when the device is adjusting

the speed;

❒ pressing the clutch pedal when the device is adjusting

the speed;

❒ pressing the button B – fig. 48 when the device is ad-

justing the speed (for versions/markets, where pro-
vided);

❒ pressing the accelerator pedal; in this case, the sys-

tem is not really de-activated but the request for ac-
celeration takes priority. The cruise control is, how-
ever, active and you do not need to press button B -
fig. 48 to restore the previous conditions after accel-
erating.

Restoring the memorized speed

If the device has been switched off, for example by press-
ing the brake or clutch pedal, the memorized speed can
be restored as follows:
❒ accelerate gradually until reaching a speed approaching

the memorised speed;

❒ engage the gear selected at the time of speed memo-

rizing;

❒ press button B-fig. 48.

Increasing the memorized speed

This can be done in two ways:
❒ by pressing the accelerator and then memorizing the

new speed reached;

or
❒ by moving the lever upwards (+).
Each operation of the lever will correspond to a slight in-
crease in speed of about 1 km/h, while keeping the lever
upwards will correspond to a continuous speed increase.

Reducing the memorized speed

This can be done in two ways:
❒ by turning the device off and then memorizing a new

speed;

or
❒ by moving the lever downwards (–) until reaching the

new speed, which will be memorized automatically.