FIAT Nuovo Doblo' Panorama - Manual (Page 130)

126
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0V0128m fig. 121 F0V0330m fig. 122
Traditional child seats and Isofix child seats can be fitted
together. An example of such a seat is shown in fig. 120.
The Universal Isofix child seat covers weight group 1. Spe-
cific Isofix child seats cover the other weight groups. These
seats must be designed, tested and type-approved specif-
ically for this car (refer to the list of cars attached to the
child seat). Due to its different anchoring system, the child
seat must be attached to the dedicated lower metal rings
A - fig. 121, located between the backrest and rear cush-
ion. After removing the rear parcel shelf (if present), se-
cure the upper belt (provided with the child seat) to ring
B-fig. 122 (one on each side) located behind the rear seat
cushion.
Note To prevent possible scoring of the table seat back-
rest, with folded rear seat (for versions/markets, where
provided), the mounting ring Isofix B - fig. 122 (one on each
side) is covered with a cloth cap, to be removed for cor-
rectly fastening the child seat.
The Universal Isofix “Duo Plus” child seat and the special
“Bimbo Fix” seat are available from Lineaccessori Fiat.
The Universal Isofix “Duo Plus” child seat and the special
G 0/1 seat are available from Lineaccessori Fiat.
For any further details on installation/use, refer to the in-
struction manual for the child seat.
Fit the child seat when the vehicle is sta-
tionary. The child seat is correctly an-
chored to the brackets when you hear the click.
Follow the instructions for assembly, disassembly
and positioning that the child seat manufacturer
must supply.
WARNING