FIAT Sedici - Manual (Page 90)

86
(1) (2) (3)
(D)
(B)
(A)
(C)
(E)
80JM104
INFORMATION
DISPLAY
When the ignition switch is in the “ON”
position, the information display shows
the following information.
Display (A)
Instantaneous fuel consumption
Display (B)
Trip meter / Average fuel consumption /
Driving range / Thermometer / Oil Life
Monitoring (for Diesel Engine Model)
Display (C)
Transaxle selector position indicator (for
automatic transaxle)
Display (D)
Odometer/Illumination control setting
Display (E)
Clock (for versions/markets, where pro-
vided)
80JM081
1. Trip meter selector knob
2. Indicator selector knob
3. Information display
Instantaneous Fuel Consumption
The display (A) shows instantaneous fuel
consumption with a bar graph only when
the vehicle is moving.
NOTE
❒ The display does not show the bar
graph unless the vehicle is moving.
❒ Depending on the vehicle’s specifica-
tion, the fuel consumption units of ini-
tial setting are indicated as L/100km,
km/L or MPG.
❒ For “L/100km” or “km/L” setting, the
indicated maximum value of instanta-
neous fuel consumption is 30. No
more than 30 will be indicated on the
display even if the actual instantaneous
fuel consumption is higher.
❒ For “MPG” setting, the indicated max-
imum value of instantaneous fuel con-
sumption is 80. No more than 80 will
be indicated on the display even if the
actual instantaneous fuel consumption
is higher.
❒ The indication on the display may be
delayed if fuel consumption is greatly
affected by driving conditions.
❒ The display shows estimated values.
Indications may not be the same as ac-
tual values.
❒ For “L/100km” or “km/L” setting, you
can change the units that instanta-
neous fuel consumption is displayed in.
Refer to “Average fuel consumption”
in this section.
071-130 SEDICI LUM FL GB 1ED 10-10-2011 14:30 Pagina 86