FIAT Sedici - Manual (Page 73)

69
79JM005
(1)
(2) (3)
(4)
79JM006
CRUISE CONTROL
(for versions/markets, where provided)
The cruise control system allows you to
maintain a steady speed without keeping
your foot on the accelerator pedal. The
controls for operating the cruise control
system are on the steering wheel.
You can use the cruise control system
with the following conditions:
❒ For manual transaxle vehicle, the gear
position is in 4th, 5th or 6th (for ver-
sions/markets, where provided).
❒ The vehicle speed is about 40 km/h (25
mph) or higher.
the “CRUISE” indicator light comes on,
you can set cruising speed.
2) Accelerate or decelerate to the desired
speed.
3) Push the “SET/COAST” switch (3) and
turn on the “SET” indicator light. Take
your foot off the accelerator pedal and the
set speed will be maintained.
(1) “CRUISE” switch
(2) “CANCEL” switch
(3) “SET/COAST” switch
(4) “RES/ACC” switch
To Set Cruising Speed
1) Turn on the cruise control system by
pushing the “CRUISE” switch (1). When
To help avoid loss of vehicle
control, do not use the cruise
control system when driving in heavy
traffic, on slippery or winding roads,
or on steep downgrades.
WARNING
“CRUISE” indicator light
When you push the “CRUISE” switch, the
system is on and a “CRUISE” indicator
light on the instrument cluster will be on.
If the cruising speed is set by
accident, you cannot decel-
erate or could loose control of the ve-
hicle. This could lead to an accident,
resulting in severe injury or death.
Turn off the cruise control system and
make sure the “CRUISE” indicator
light is off when the system is not in use.
WARNING
52D113
When the vehicle’s speed is controlled by
the cruise control system, a “SET” indi-
cator light on the instrument cluster will
be on.
“SET” indicator light
65D474
057-070 SEDICI LUM FL GB 1ED 10-10-2011 14:27 Pagina 69