FIAT Sedici User Manual
Page 74
70
To Change Speed Temporarily
When the cruising speed is maintained,
you can temporarily accelerate or decel-
erate.
To accelerate, depress the accelerator
pedal. When you take your foot off the
pedal, your vehicle will return to the set
speed.
To decelerate, depress the brake pedal.
The set speed will be canceled and “SET”
indicator light will go off.
To resume the previously set speed, push
the “RES/ACC” switch (4) and turn on the
“SET” indicator light again when vehicle
speed is above 40 km/h (25 mph). The ve-
hicle will accelerate to and maintain the
previously set speed.
TO CHANGE CRUISING SPEED
Using the accelerator pedal
To reset at a faster cruising speed, accel-
erate to the desired speed using the ac-
celerator pedal and push the
“SET/COAST” switch (3). The new speed
will be maintained.
Using the brake pedal
To reset at a slower cruising speed, de-
celerate to the desired speed using the
brake pedal and push the “SET/COAST”
switch (3). The new speed will be main-
tained.
NOTE When the brake pedal is de-
pressed, the “SET” indicator light goes off
until reset the cruising speed.
Using the cruise control switch
To reset at a faster cruising speed, press
repeatedly or hold in the “RES/ACC”
switch (4). Vehicle speed will steadily in-
crease. When you release the switch, the
new speed will be maintained.
To reset at a slower cruising speed, press
repeatedly or hold in the “SET/COAST”
switch (3) until the vehicle has slowed to
the desired speed, then release the switch.
The new speed will be maintained.
NOTE You can adjust the set speed by ap-
proximately 1.6 km/h (1.0 mph) by push-
ing a cruise control switch quickly.
Cancellation of the Cruise Control
The “SET” indicator light will go off and
the cruise control will be canceled tem-
porarily with following procedures:
❒ Push the “CANCEL” switch (2).
❒ Depress the brake pedal.
❒ For manual transaxle, depress the
clutch pedal.
❒ The vehicle speed falls more than about
20 km/h (12.5 mph) below the set speed.
❒ Any time the vehicle speed falls below
40 km/h (25 mph).
❒ When the vehicle skids and ESP
®
(for
versions/markets, where provided) is
activated.
To resume the previously set speed, push
the “RES/ACC” switch (4) and turn on the
“SET” indicator light. Besides, the vehicle
speed has to be above 40 km/h (25 mph)
when the vehicle is not in the above con-
ditions.
To turn off the cruise control system, push
the “CRUISE” switch (1) and make sure
the “CRUISE” indicator light is off.
Also, if the malfunction indicator light in
the instrument cluster comes on or blinks,
the cruise control system will be turned
off.
NOTE If you turn off the cruise control
system, the previously set speed in the
memory is cleared. Reset your cruising
speed again.
057-070 SEDICI LUM FL GB 1ED 10-10-2011 14:27 Pagina 70