FIAT Freemont - Manual (Page 273)

Do not touch the new bulb with your
fingers. Oil contamination will severely
shorten bulb life. If the bulb comes in
contact with an oily surface, clean the bulb with
rubbing alcohol.
6. Insert bulb into the lamp housing until the index
tabs are engaged in the slots of the collar.
7. Firmly and evenly push the bulb straight into the
lamp housing until both side latches lock firmly into
place.
REAR FOG LAMP
1. Reach behind the bumper above the bumper rein-
forcement and press the release tabs on the fog
lamp housing. (fig. 163)
2. Separate the fog lamp housing from the bumper
fascia.
3. Disconnect the electrical harness connector.
(fig. 164)
4. Firmly grasp the bulb by the two side latches and
squeeze them together to unlock the bulb from the
back of the lamp housing.
5. Pull the bulb straight out from the keyed opening in
the housing.
6. Remove the bulb from the connector socket and
install the replacement bulb.
(fig. 163)
Release Tabs
(fig. 164)
Electrical Connector
267
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS
AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
CARE
TECHNICAL
SPECIFICATIONS
CONTENTS