beautypg.com

Brake system – FIAT Freemont User Manual

Page 124

background image

To avoid damage to the roof rack and

vehicle, do not exceed the maximum roof
rack load capacity of 68 kg. Always dis-

tribute loads as evenly as possible and secure the
load appropriately.

Long loads, which extend over the windshield,

such as wood panels or surfboards, or loads with
large frontal area should be secured to both the
front and rear of the vehicle.

Place a blanket or other protection between

the surface of the roof and the load.

Travel at reduced speeds and turn corners

carefully when carrying large or heavy loads on
the roof rack.Wind forces, due to natural causes
or nearby truck traffic, can add sudden upward
lift to loads. This is especially true on large flat
loads and may result in damage to the cargo or
your vehicle.

WARNING!

Cargo must be securely tied before driv-
ing your vehicle. Improperly secured

loads can fly off the vehicle, particularly at high
speeds, resulting in personal injury or property
damage. Follow the roof rack cautions when
carrying cargo on your roof rack.

BRAKE SYSTEM

Your vehicle is equipped with dual hydraulic
brake systems. If either of the two hydraulic

systems loses normal capability, the remaining system
will still function. However, there will be some loss of
overall braking effectiveness. This will be evident by
increased pedal travel during application and greater
pedal force required to slow or stop the vehicle. In
addition, if the malfunction is caused by a leak in the
hydraulic system, the “Brake System Warning Light”
will turn on as the brake fluid level drops in the master
cylinder.

In the event power assist is lost for any reason (i.e.,
repeated brake applications with the engine OFF) the
brakes will still function. However, the effort required
to brake the vehicle will be much greater than that
required with the power system operating.

118

KNOWING

YOUR

VEHICLE

SAFETY

STARTING

AND

DRIVING

WARNING

LIGHTS

AND

MESSAGES

IN AN

EMERGENCY

SERVICING

AND

CARE

TECHNICAL

SPECIFICATIONS

CONTENTS