FIAT Freemont - Manual (Page 188)

2. Pull the release loop forward to release the latch
and seat cushion. (fig. 128)
3. Lift the seat cushion up and push back to lock it in
the booster seat position. (fig. 129)
4. Place the child upright in the seat with their back
firmly against the seatback.
5. Grasp the latch plate and pull out the seat belt.
6. Slide the latch plate up the webbing as far as neces-
sary to allow the seat belt to go around the child's
lap.
NOTE: The lap portion of the seat belt should be low
on the hips and as snug as possible.
7. Once the seat belt is long enough to fit properly,
insert the latch plate into the buckle until you hear
a “click.” (fig. 130)
8. To remove the slack from the lap belt, pull upward
on the shoulder portion of the seat belt.
9. To release the seat belt, push the red button on the
buckle.
(fig. 128)
Release Loop
(fig. 129)
Booster Seat
182
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS
AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
CARE
TECHNICAL
SPECIFICATIONS
CONTENTS