FIAT Freemont - Manual (Page 174)

2. The seat belt latch plate is along side the pillar near
the back of your seat. Grasp the latch plate and pull
out the belt. Slide the latch plate up the webbing as
far as necessary to make the belt go around your lap.
(fig. 117)
3. When the belt is long enough to fit, insert the latch
plate into the buckle until you hear a “click.”
(fig. 118)
WARNING!
• A belt that is buckled into the wrong
buckle will not protect you properly.The
lap portion could ride too high on your body,
possibly causing internal injuries. Always buckle
your belt into the buckle nearest you.
•
A belt that is too loose will not protect you
properly. In a sudden stop you could move too far
forward, increasing the possibility of injury.Wear
your seat belt snugly.
(Continued)
(fig. 117)
Pulling Out Lap/Shoulder Belt
(fig. 118)
Connecting Latch PlateTo Buckle
168
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS
AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
CARE
TECHNICAL
SPECIFICATIONS
CONTENTS