FIAT Bravo - Manual (Page 208)

207
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
CAR
MAINTENANCE
Changing the rear
window blade
Proceed as follows:
❒ raise the cover A-fig. 15 and remove
the arm from the car, slackening the nut
B that fastens it to the pivot pin;
❒ fit the new arm, positioning it correct-
ly, and fully tighten the nut;
❒ lower the cover.
Rear window wiper fig. 17
Rear window washer jets are fixed.
The nozzle holder is on the rear window.
SPRAY NOZZLES
Windscreen wiper fig. 16
If the jet of fluid is inadequate, firstly check
that there is fluid in the reservoir: see
“Checking fluid levels” in this section).
Then check that the nozzle holes are not
clogged, if necessary use a needle.
The windscreen jets are fixed.
fig. 15 F0Q0663m fig. 16 F0Q0661m fig. 17 F0Q0660m
191-212 BRAVO GB 10-05-2007 9:21 Pagina 207