FIAT Bravo User Manual

Page 160

159

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

IN AN

EMERGENCY

Please note:
❒ the jack weight is 1,76 kg;
❒ the jack requires no adjustment;
❒ the jack cannot be repaired: if it breaks

it must be replaced with a new genuine
jack;

❒ no tool other than its cranking device

may be fitted on the jack.

fig. 2

F0Q0732m

fig. 3

F0Q0392m

fig. 4

F0Q0393m

❒ for versions with Fix&Go automatic or

take the tool kid from the luggage com-
partment;

❒ for versions with small spare wheel, un-

screw the retaining device E-fig. 3, take
the tool kit F, place near to the wheel
to be replaced and then take the small
spare wheel G;

❒ remove wheel hubcap H-fig. 4 (ver-

sions with steel rims) or remove the
hub cap (versions with alloy rims);

To change a wheel proceed as follows:
❒ Stop the car is a position that is not

dangerous for oncoming traffic where
you can change the wheel safely. The
ground should be flat and adequately
firm;

❒ turn the engine off and pull up the hand-

brake; engage first gear or reverse;

❒ use the handle A-fig. 2 to remove the

piece of stiff cover B; loosen the clamp-
ing device E-fig. 3;

155-190 BRAVO GB 10-05-2007 9:19 Pagina 159