FIAT Bravo User Manual

Page 161

160

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

IN AN

EMERGENCY

❒ undo the wheel bolts and remove the

wheel.

❒ make sure the contact surfaces be-

tween spare wheel and hub are clean
so that the fastening bolts will not come
loose;

fig. 6

F0M0395m

❒ warn anybody nearby that the car is

about to be lifted. They must stay clear
and not touch the car until it is back on
the ground;

❒ fit the handle R-fig. 6 to operate the

jack and raise the car until the wheel
is a few centimetres from the ground;

❒ using the wrench provided L-fig. 5

loosen the fastening bolts by about one
turn; if the car is fitted with alloy rims,
shake the car to facilitate removing this
rim from the wheel hub;

❒ work the jack crank M-fig. 6 to extend

it until the groove N on the upper part
of the jack is correctly inserted on the
lower profile P of the body in point Q
(at approx. 72 cm from the front wheel
centre or 75 cm from rear wheel cen-
tre);

fig. 5

F0Q0394m

155-190 BRAVO GB 10-05-2007 9:19 Pagina 160