FIAT Linea - Manual (Page 162)

161
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE
CAR
IN AN
EMERGENCY
DIPPED BEAM HEADLIGHTS
fig. 18
To change the bulb, proceed as follows:
❒ remove the clipped-on cover;
❒ disconnect the central electric connec-
tor and release the bulb holder catch;
❒ remove the bulb B and replace it;
❒ fit the new bulb, making the outlines of
the metallic part coincide with the
grooves on the reflector;
❒ refit the bulb holder catch and reconnect
the electrical connector;
❒ refit the protection and check that it
is correctly locked.
MAIN BEAM HEADLIGHTS
fig. 19
To change the bulb, proceed as follows:
❒ remove the clipped-on cover;
❒ disconnect the central electric connec-
tor and release the bulb holder catch;
❒ remove the bulb B and replace it;
❒ refit the new bulb;
❒ refit the bulb holder catch and reconnect
the electrical connector;
❒ refit the protection and check that it
is correctly locked.
DIRECTION INDICATORS
Front fig. 19/a
To change the bulb, proceed as follows:
❒ steer the right/left wheel outwards as
shown in the figure;
❒ turn the catch as shown by the arrow,
then use the lid;
❒ remove the bulb holder cover by turn-
ing it anticlockwise;
fig. 18 F0R0222m fig. 19/a F0R0224m fig. 19 F0R0223m