FIAT Linea - Manual (Page 161)

160
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
IINDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE
CAR
IN AN
EMERGENCY
IF AN EXTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
“When needing to change a bulb”.
FRONT LIGHT CLUSTERS
fig. 16
The front light clusters contain sidelights,
dipped beam, main beam and direction in-
dicator bulbs.
The bulbs are arranged inside the light unit
as follows:
A main beam
B side lights
C dipped beam (two lights)
D direction indicators.
SIDELIGHTS fig. 17
To change the bulb, proceed as follows:
❒ remove the clipped-on cover;
❒ press tabs B and remove the bulb
holder;
❒ remove the bulb C and replace it;
❒ refit the bulb holder and refit the cap
and check that it is locked properly.
fig. 16
C B D
A
F0R0220m fig. 17 F0R0221m