Eizo FORIS FX2431 - Manual (Page 9)

7
English
Troubleshooting Setting/Adjustment Prior to use Installation
Connecting Cables
1
Connect each device.
• Connect a PC ............................................See below
• Connect a USB device ................................. Page 10
• Connect an AV device .................................. Page 11
• Connect an audio device ............................. Page 1
●
Connect a PC
Attention
• When replacing the current monitor with an FX2431 monitor, be sure to change the PC settings for
resolution and vertical frequency to those which are available for the FX2431 monitor referring to the
resolution table (see page ) before connecting the PC.
1. Connect the monitor to the PC with a signal cable that matches the connectors.
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
• When connecting to PC1 input (digital signal connection)
Connectors on the
PC
DVI connector
Connectors on the
monitor
Signal cable FD-C39 (supplied) DVI-D connector
Audio cable* 1
(stereo mini jack to stereo mini jack)
USB cable MD-C93 (supplied)* 2
USB
Downstream
USB
Upstream
* 1 Please purchase the cable.
* When connecting two PCs to the monitor,
please purchase another cable.
Audio output
connector
Audio input
connector