Eizo FORIS FX2431 - Manual (Page 14)

1
English
●
Connect an audio device
1. Connect the monitor to the audio device with an audio cable that matches the connectors.
Connectors on the
audio device
(Pin jack)
R L
(Stereo mini jack)
Connector on the
monitor
Audio output
connector
Audio cable* 1
(stereo mini jack to pin jack)
Audio cable* 1
(stereo mini jack to stereo mini jack)
* 1 Please purchase the cable.
Audio input
connector
Attention
• When using the audio device, set the volume of the monitor to “0”. Adjust the volume and sound on
the audio device.
NOTE
• When using headphones, connect the
headphones to the headphone jack on
the monitor.
Headphone
Headphone jack
2
Plug the power cord of the monitor into a power outlet.
1. Plug the power cord into a power outlet and the Power connector on the monitor.
Adjusting the Screen Height and Angle
Hold left and right edge of the monitor with both hands, and adjust the screen height, tilt and swivel the screen to the
best condition for working.
Troubleshooting Setting/Adjustment Prior to use Installation