Eizo FORIS FX2431 - Manual (Page 13)

11
English
●
Connect an AV device
1. Connect the monitor to the AV device with a signal cable that matches the connectors.
Connectors on the
AV device
Connectors on the
monitor
Audio cable* 1
(pin jack to pin jack)
Video cable* 1 * 2
or
S-Video cable* 1 * 2
R L Video S-Video
Audio cable* 1
(pin jack to pin jack)
Component video cable* 1
* 1 Please purchase the cable.
* Use either cable to connect the monitor and the AV
device.
* Please use the cable on which “High Speed HDMI TM
Cable” is written.
HDMI connector HDMI connector HDMI cable* 1 * 3
R L
Component video
Component video
Attention
• When controlling the AV device connected to HDMI input of the monitor using the HDMI CEC
function, [HDMI CEC Setting] of the Setting menu is required to be set (see page 16).
Troubleshooting Setting/Adjustment Prior to use Installation