Setting hdmi cec, English, Press on the remote control – Eizo FORIS FX2431 User Manual
Page 18: Choose [monitor settings] with or and press, Choose [hdmi cec setting] with or and press, Set each item, Press
16
English
Prior to use
Installation
Troubleshooting
Setting/Adjustment
Setting HDMI CEC
(When controlling external devices from the monitor)
This monitor supports HDMI CEC (Consumer Electronics Control). The interactive control becomes possible by
connecting the external device applicable to HDMI CEC to the monitor with the HDMI cable.
Set the following when controlling the external device from the monitor using the HDMI CEC function.
Attention
• Using the HDMI CEC function, this monitor can control only those external devices such as recorders
and players applicable to HDMI CEC. However, this function does not work correctly with some devices.
• For details on the control of external devices and the HDMI CEC function, refer to the Remote Control
Guide and the User’s Manual on the “EIZO LCD Utility Disk” (CD-ROM).
1
Confirm that the HDMI CEC setting of the external device is enabled.
For details on the setting, refer to the manual of the external device.
2
Press
on the remote control.
The Setting menu appears.
3
Choose [Monitor Settings] with
or
and
press
.
The Monitor Settings menu appears.
4
Choose [HDMI CEC Setting] with
or
and
press
.
The HDMI CEC Setting menu appears.
5
Set each item.
1. Choose the setting item with
or
and press
.
The setting menu of the selected item appears.
2. Select the setting with
or
and press
.
• [HDMI CEC] : Select “Enable”.
• [Power On Link] : Select “Enable” when turning on the monitor
in conjunction with the power on operation of
the external device.
• [Power Off Link] : Select “Enable” when turning off the external
device in conjunction with the power off
operation of the monitor.
6
Press
.
The setting is completed.
HDMI CEC Setting
HDMI CEC
Power On Link
Power Off Link
Reset
Return
[ENTER] : Enter
: Select
[EXIT]: Exit
[ ]
Enable
[ ]
Disable
[ ]
Enable
HDMI CEC Setting menu
Monitor Settings menu
Monitor Settings
Language
USB Selection
Power Indicator
HDMI CEC Setting
Real Image
Sub-Window Lucent
Advanced Settings(xxxx)
Return
[ENTER] : Enter
: Select
[EXIT]: Exit
Reset
[ ]
On
[ ]
English
[ ]
Auto
[ ]
0
[ ]
Disable