SoundMax SM-2409 - Manual (Page 3)

3
When the device is moved from cold premises to the warm room or vice versa, condensate may form on the laser
head and the device may not operate properly. In this case please turn the device on for 1-2 hours without disc
before playback to heat it to a proper operation temperature.
Please place the device in a dry and well-aired area. Do not place it near heating units or expose it to direct sunlight,
mechanical vibration, humidity or excessive dust.
Never use liquid detergents, abrasives or organic compounds (alcohol, gasoline, etc) to clean the unit body.
All repairs and technical service should be made by qualified specialist from service centers.
All images provided herein are schematic drawings and may differ from real objects.
Power supply
Battery operation
Open the battery compartment cover.
Insert 8 pcs of C-type (UM2) batteries. Please observe correct battery polarities or the set will not work.
Close the battery compartment cover.
AC operation
Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains
voltage in your home.
Plug the corresponding end of cord into the power socket on the rear of the set.
Insert the plug into power supply.
Caution:
When the set is only used with AC or is not used for 2 weeks or more, please remove the batteries, to avoid damage
to the set from leakage of batteries.
Always switch off the unit when not in use.
Always unplug the appliance from power supply, when no use long time.