SoundMax SM-2409 - Manual (Page 12)

12
Step playback
During playback press repeatedly STEP button on the RC for frame-by-frame playback. While step playback, press
PLAY/PAUSE button on the RC to resume normal playback.
A-B repeat
During playback press A-B button on the RC to set the beginning point of the fragment to repeat. Press A-B button again
to set the final point. The selected fragment will be repeated. Press A-B button again to return to normal playback.
PBC (Playback Control) function (for VCD only)
This function is only available for the VCD with PBC function. Press PBC button on the RC to set PBC on/off; when PBC is
off, the screen will show PBC menu if you switch PBC on. If the menu consists of a list of titles, you can select a desired
one using number buttons on the RC.
Return (for VCD only)
Press RETURN button on the RC to return to the previous menu of the disc (only for VCDs supporting PBC).
3D sound
Press 3D button on the RC to enable 3D mode menu. In this menu press cursor buttons for navigation and press ENTER
button to confirm your selection. You can select 5 surround sound modes or 5 equalizer modes. Press 3D button again to
disable 3D mode menu.
Resume playback
During DVD playback, press RESUME button on the RC to resume playback from the stop point.
Clearing data
After you input erroneous numbers, press CLEAR button to delete them.
Sound pitch control
Press PITCH UP/PITCH DOWN buttons on the RC to raise or lower the sound pitch. Press PITCH NORMAL button to reset
the pitch to initial state.
Changing angle (for DVD only)
Press ANGLE/DEL button on the RC to playback images at different camera angles. If a disc doesn’t support multi-angle
playback, this function will not work.