SoundMax SM-2409 - Manual (Page 14)

14
After ripping is started, a menu will appear showing the progress of the procedure. In this menu you can change the
ripping speed or cancel ripping.
Notes:
A folder named RIPPING is created on the USB-drive or memory card for the ripped files. If such a folder already
exists on the storage, ripping operation is unavailable.
To avoid data loss, do not disconnect the USB-drive or memory card until ripping is completed.
Deleting data from USB/SD/MMC
Start USB or card playback. Select a file or a folder to be deleted, then press ANGLE/DEL button on the RC. The selected
item will be deleted.
USB/SD/MMC operation
USB/SD/MMC notes
USB format supports 2.0. Capacity: up to 8 Gb.
For correct and satisfactory operation, licensed SD/MMC memory cards of famous brands should be used with this unit.
Avoid using memory cards of unknown brands. Capacity: up to 8 Gb.
Inserting SD/MMC card/USB device
Set FUNCTION switch to DVD/USB/SD position. Insert an MMC/SD card or a USB device into MMC/SD slot or USB slot.
Press MODE button on the unit to select USB or SD mode. The first card/USB device track playback will start. All the
operations with files stored in a memory card or USB are the same as described in Disc Operations for file discs.