SOEHNLE Tendence User Manual
Page 12
12
DATA ENTRY
For the correct functionality
of the trend weight scale, it is
necessary to enter the perso-
nal, desired or target weight
of the respective person and
to immediately step on the
scale once this value is enter-
ed.
This scale is equipped with
an energy savings mode and
will automatically switch off
if no keys are pushed for
approx. 40 seconds.
1. To enter data, place scale
on a table.
2. Start data entry using the
key .
3. Select memory slot
(P1 ... P4)
(
▼ = minus, ▲ = plus)
and confirm using (
).
Memory slots, which are
already programmed, are
displayed with the
-symbol.
4. Enter the desired weight
(
▼ = minus, ▲ = plus)
and confirm using (
).
5. Confirm the display “OK”
using the (
)-key.
6. As soon as “0.0” appears
in the display, the person
must step on the scale for
the initial weighing.
7. The current weight (star-
ting weight) is displayed.
The scale will then auto-
matically switch off.
If no load is put onto the
scale, "Error” will appear
in the display after 40
seconds and the scale will
automatically switch off.
GB
3.
4.
5.
6.
7.
BA63150tendence117634_V8.qxd 07.02.2007 6:58 Uhr Seite 12