Sennheiser SR 2020-D - Manual (Page 98)

30
Using the components
Automatically switching the HDE 2020 D on/off
The receiver automatically switches on when you pull
the earbows
³
apart. The display
»
switches on.
When you release the earbows, the receiver switches
to standby mode (audio deactivated) and then
switches off after 2minutes.
Switching the EK 2020 D on/off
You can connect an induction loop or any pair of head-
phones with a 3.5 mm mono or stereo jack plug to the
headphone socket
²
of the EK 2020 D. The head-
phone impedance must be 32
Ω or higher.
̈
Connect the 3.5 mm jack plug of your headphones
to the headphone socket of the EK 2020 D.
To switch the receiver on:
̈
Briefly press the ON/OFF button
´
.
The display
»
switches on.
To switch the receiver off:
̈
Press the ON/OFF button
´
for 3 seconds.
When you unplug the headphones from the receiver
or switch off the transmitter, the receiver automati-
cally switches off after 5 minutes.
Switching the charging case on/off
To switch the charging case on:
̈
Set the mains switch
Ƹ
to the position “ I ”.
The LED POWER
²
lights up.
To switch the charging case off:
̈
Set the mains switch
Ƹ
to the position “ 0 ”.
The LED POWER
²
goes off.
»
´
»
²
Ƹ
Tourguide2020_516509_0909_Sp6.book Seite 30 Montag, 22. März 2010 1:12 13