Sennheiser SR 2020-D - Manual (Page 104)

36
Using the components
̈
Make sure that the lock mode is deactivated
(see “Activating/deactivating the lock mode” on
page 45).
̈
Press the SET button.
The operating menu appears and the first menu
item “
CHAN ” flashes on the display.
̈
Press the SET button.
The current channel flashes on the display.
̈
Press
̆
/
̄
to change the channel.
If you press
̆
, the display jumps to the next
channel; if you press
̄
, the display jumps to the
previous channel.
By pressing and holding the
̆
/
̄
buttons, the
display cycles continuously (repeat function).
̈
Press the SET button to permanently store the
selected channel.
“
STORED ” briefly appears on the display. The body-
pack transmitter or the radio microphone now
transmits on the selected channel. The last menu
item selected is shown on the display.
To exit the operating menu:
̈
Use
̆
/
̄
to select the “ EXIT ” menu item and press
the SET button.
The standard display is shown.
Or:
̈
Press and hold the ON / OFF button until the stand-
ard display is shown.
PEAK
ON/OFF ON/OFF
SET SET
MUTE
LOW BATT
Radio microphone Bodypack transmitter
Tourguide2020_516509_0909_Sp6.book Seite 36 Montag, 22. März 2010 1:12 13