Sennheiser SR 2020-D User Manual

Page 95

Putting the components into operation

Note:

Always charge the accupack in the charging
compartment

of the charging case (see “Charg-

ing the BA 2015 accupack” on page 33).

Inserting and replacing the batteries/accupack of
the bodypack transmitter

For powering the bodypack transmitter, you can
either use the rechargeable BA 2015 accupack

two 1.5 V AA size batteries. NB: Do not use any other
rechargeable batteries!

Push the two battery compartment catches

and

open the battery compartment cover

Insert the BA 2015 accupack

or the batteries as

shown in the diagram on the left. Please observe
correct polarity when inserting the accupack/
batteries.

Close the battery compartment cover

Connecting a microphone to the bodypack
transmitter

Note:

Suitable Sennheiser microphones are listed on
page 8.

Connect the microphone to the microphone
input

of the bodypack transmitter.

Lock the plug by screwing down the coupling ring.

Adjust the sensitivity of the microphone input as
described on page 42.

Tourguide2020_516509_0909_Sp6.book Seite 27 Montag, 22. März 2010 1:12 13