Setting the cooking programme, Setting the key lock – KORTING OKB481CRC User Manual

Page 29

Setting the Cooking
Programme

Operation Period
This programme enables to e.g. automati-

cally turn on the oven for a preset period via the
relay of the timer.

NOTICE: An operation period can only be set

if the oven selector switch is not in zero position!
Please also observe that all inputs are cancelled
if you move the oven selector switch to zero po-
sition during an active cooking programme!

The setting range of the operation period is

from 0:00 to 23:59. Proceed as follows:

Press the mode button until the

indicator

for operation period ﬂ ashes. On the display, the
time “0:00” is displayed instead of the time of
day.

Note: If you do not make an input in the next

5 seconds, the timer returns to the time of day
display.

Use the minus and plus button to set the de-

sired period in steps of 1 minute. The

indica-

tor for operation period is illuminated.

You can also conﬁ rm the input with the mode

button.

After the set time has elapsed, a signal

sounds (.... ....) (i.e. a pause follows after four
signals). The oven swiches off. On the display,
the

indicator for operation period ﬂ ashes and

the time “0:00” is displayed. The signal ends au-
tomatically after approx. 1 minute while the
indicator continues to ﬂ ash. Press any button to
exit the current mode or to stop the signal indi-
cating the end of time.

Operation End
(Type Operation Period/Operation End)
In case of a previously set operation period

(see Setting the Cooking Programme > Opera-
tion Period), this programme enables you to
shift the operation end forward with regard to
time, i.e. to delay it.

NOTICE: An operation end can only be set

if a timer of the type (Operation Period and
Operation End) is used and if the oven selec-
tor switch is not in zero position. If the cooking

programme is active, please also observe that
all inputs are cancelled if you move the oven
selector switch to zero position!

Press the mode button until the

indicator

for operation end ﬂ ashes. The current time of
day is displayed on the display.

Note: If you do not make an input in the next

5 seconds, the timer returns to the currently ac-
tive operation period programme.

Starting from the current time of day, use the

plus button to set the desired end in steps of 1
minute.

The

indicator for operation end remains

illuminated until the baking process starts. This
occurs at the time “operation end minus opera-
tion period”. At this moment, the timer changes
to operation period mode. The

indicator for

operation end is extinguished, the

indicator

for operation period is illuminated and the re-
maining operation period is displayed instead.

The running programme can also be called

with the mode button while it is active. This

enables to check and possibly correct the set

data using the set buttons. To avoid errors, it is
not possible to reset the time of day while a pro-
gramme is active.

After the set time has elapsed, a signal

sounds (.... ....) (i.e. a pause follows after four
signals). The oven swiches of. On the display,
the

indicator for operation period ﬂ ashes

and the time “0:00” is displayed. The signal
ends automatically after approx. 1 minute while
the

indicator continues to ﬂ ash. Press any

button to exit the current mode.

You can also manually stop the signal indi-

cating of the end of the time by pressing any
button or move the oven selector switch to the
zero position.

Setting The Key Lock

If you activate the key lock, the timer can

no longer be operated with regard to time and
programme. Neither the time of day nor an
elapsing minute minder nor an active cooking
programme can be modiﬁ ed. However, the set
functions will operate accurately.