KORTING OKB481CRC - Manual (Page 27)

UK
27
Instructions for use of control devices (depending on model)
TOUCH-CONTROL PROGRAMMER CLOCK (Fig. 6)
Setting the time of day
When the oven is fi rst connected to the pow-
er supply, the display shows 12.00 and the led
indicator (L4) fl ashes. Press the touch control
buttons
and to set the time of day: after
fi ve seconds the time is stored and L4 switches
off. To change the time at a later stage, press
the mode selector button
until L4 fl ashes.
Minute minder
Press the mode button until L3 fl ashes,
then set the desired cooking time using the
and buttons. The setting range is from
0.01 to 2.30 h. The display will show the set
time and L3 will remain lit. At the end of the
set time, an acoustic signal sounds (two
signals every two seconds) and L3 fl ashes.
Press any button to stop the acoustic signal
and switch off L3.
Cooking time
Press the mode buttonII until L1 fl ashes.
Set the desired cooking time using the and
buttons (the setting range is from 0.01 to
10.00h): after fi ve seconds the cooking time is
stored and L1 remains lit. After the set time has
elapsed the oven switches off automatically, an
acoustic signal sounds (four signals every two
seconds) and L1 fl ashes. Press any button to
stop the acoustic signal and switch off L1.
Cooking end time
Press the mode button until L2 fl ashes.
Set the desired cooking end time (max. 23.59)
using buttons
and after fi ve seconds the
time is stored and L2 remains lit. At the set time
the oven switches off automatically, an acoustic
signal sounds (four signals every two seconds)
and L2 fl ashes. Press any button to stop the
acoustic signal and switch off L2.