RIDGID SLIDING LADDER RACK 250 - Manual (Page 2)

Tools For The Professional TM
SLIDING LADDER RACK
Ridge Tool Company 1
GB
Operating Instructions
SLIDING
LADDER RACK
MODEL 250
www.ridgid.eu/jobsitestorage
TOOLS REQUIRED
• Electric Drill
• 5/16” Hex Driver Bit
• Phillips Screw Driver
• Ruler
• 7/16” Wrench
• 7/16” Deep Well Socket
• Ratchet Wrench
• Lithium Grease
PARTS LIST
To reduce the risk of serious personal injury, read and follow all instructions and warnings before installing or using this
product.
RIDGID recommends the Model 250 sliding ladder rack be installed in service or delivery vans equipped with a bulkhead.
A bulkhead divider between cargo and driver/passenger compartment reduces the likelihood material will come forward and
cause personal injury during a vehicle accident.
WARNING
–ATTENTION–
NOTE: This product is only intended for use inside a van, enclosed trailer or truck with metal cap.
(1) Cord guide (24)1/4” Flat Washer (1) Front cradle (2) Connecting bracket
(4) Strut channel nut (1) Pan head machine
screw, 1/4 x 20 x 7/8
(1) Inside side catch (3) Mounting bracket
(2) Stop plate (2) Shock cord (1) Outside side catch (1)Vinyl cap
(1) 1.25 OD Washer (4) Lock washer (1) Fixed catch (8) 1/4 x 14 self drilling
screw
(4) Hex head cap screw,
1/4 x 20 x 1
(1) Adjustable mount (17)Carriage bolt,
1/4 x 20 x 3/4
(1) Rear mounting bracket
(20) Nylon lock nut, 1/4 x 20 (1) Fixed mount (1) Safety cable assy.
(2) Carriage bolt,
1/4 x 20 x 1-1/2
(1) Adjustable arm (3) Rail
sliding_eng.indd 1 27/04/2009 11:04:01