RIDGID micro CA-25 - Manual (Page 6)

micro CA-25 Inspection Camera
4
• Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-
skid safety shoes, hard hat or hearing
protection used for appropriate condi-
tions will reduce personal injuries.
Equipment Use and Care
• Do not force equipment. Use the cor-
rect equipment for your application.
The correct equipment will do the job
better and safer at the rate for which it
is designed.
• Do not use equipment if the switch
does not turn it ON and OFF. Any
tool that cannot be controlled with
the switch is dangerous and must be
repaired.
• Disconnect the batteries from the
e quip ment before making any ad-
justments, changing accessories, or
storing. Such preventive safety mea-
sures reduce the risk of injury.
• Store idle equipment out of the reach
of children and do not allow persons
unfamiliar with the equipment or these
instructions to operate the equipment.
Equipment can be dangerous in the
hands of untrained users.
• Maintain equipment. Check for mis-
alignment or binding of moving parts,
missing parts, breakage of parts and
any other condition that may affect
the equipment’s operation. If dam-
aged, have the equipment repaired
before use. Many accidents are caused
by poorly maintained equipment.
• Use the equipment and accessories
in accordance with these instruc-
tions, taking into account the work-
ing conditions and the work to be
performed. Use of the equipment
for operations different from those
intended could result in a hazardous
situation.
• Use only accessories that are recom-
mended by the manufacturer for
your equipment. Accessories that
may be suitable for one piece of equip-
ment may become hazardous when
used with other equipment.
• Keep handles dry and clean; free
from oil and grease. Allows for better
control of the equipment.
Service
• Have your equipment serviced by a
qual i fied repair person using on ly
identical replacement parts. This will
ensure that the safety of the tool is
maintained.
Specific Safety
Information
WARNING
This section contains important safety in-
formation that is specific to the inspection
camera.
Read these precautions carefully before us-
ing the micro CA-25 In spec tion Cam era to
reduce the risk of electrical shock or other
serious injury.
SAVE THESE INSTRUCTIONS!
A manual holder is supplied in the carrying
case of the micro CA-25 Inspection Camera
to keep this manual with the tool for use by
the operator.
micro CA-25 Inspection Camera
Safety
• The micro CA-25 imager head and ca-
ble are waterproof to 10' (3 m). The
hand-held display unit is not. Do not
expose the display unit to water or
rain. This increases the risk of electrical
shock.
• Do not place the micro CA-25 inspec-
tion Cam era anywhere that may con-
tain a live electrical charge. This in-
creases the risk of electrical shock.
• Do not place the micro CA-25 inspec-
tion Cam era anywhere that may
contain moving parts. This increases
the risk of entanglement injuries.
• Do not use this device for personal
inspection or medical use in any
way. This is not a medical device. This
could cause personal injury.
• Always use appropriate personal pro-
tective equipment while handling and
using the micro CA-25 inspection Cam -
era. Drains and other areas may con-
tain chemicals, bacteria and other sub-
stances that may be toxic, infectious,
cause burns or other issues. Appropri-
ate personal protective equipment
always includes safety glasses and