SUUNTO Vyper - Manual (Page 57)

55
4.3.3.2. Dive Computer Units Setting
[2 UNITS]
To enter the Dive Computer Units Setting mode,
select MODE- 3 SET- 3 SET PREF- 2 UNITS.
This will enable you to choose between metric and
imperial units (Fig. 4.43 and Fig. 4.44).
4.3.3.3. Dive Computer Model
Setting [3 MODEL]
In the Dive Computer Model Setting Mode the dive
computer can be set to be an AIR computer, NITROX
computer or a depth GAUGE with a timer.
To enter the Dive Computer Model Setting Mode
select MODE- 3 SET- 3 SET PREF- 3 MODEL
(Fig. 4.45). After entering this mode you are able to
change between AIR, NITROX and GAUGE modes
(Fig. 4.46).
Fig. 4.42 Setting The
Backlight On Time. Press the
scroll buttons to change the
backlight on/off and to set the
time value.
Fig. 4.44 Setting Metric/
Imperial units. Fig. 4.46 Setting Dive
Computer Model.
Fig. 4.41 Backlight Setting
Mode. [1 LIGHT].
SELECT
Fig. 4.40 Setting Preferences
Mode. [3 SET PREF]
SELECT SELECT
OK
TIME
°C
° F
m ft
OK OK
Fig. 4.43 Dive Computer
Units Setting Mode.
[2 UNITS].
Fig. 4.45 Dive Computer
Model Setting Mode. [3
MODEL].
SELECT