Reference dimensions – Milwaukee M12 PCG User Manual

Page 8

NOTES:
1. MUST COMPLY WITH METCO ENGINEERING STANDARD 3-7, INCLUDING:

1. MUST BE A UL RECOGNIZED AND C.S.A. APPROVED MARKING AND LABELING SYSTEM.
2. MATERIAL: 2 MIL SILVER FOIL POLYESTER BASE STOCK WITH 1 MIL MATTE CLEAR POLYESTER

OVERLAMINATE (E.G., SILVER FOIL + MATT PP).

3. ADHESIVE: 2 MIL ACRYLIC BASED SYSTEM FOR USE ON POLYCARBONATE, NYLON, AND POLYPROPYLENE.

ADHESIVE TO BE UL RECOGNIZED AND CSA APPROVED.

2. COLOR MUST BE PER THE FOLLOWING:

1. RED (WHEN PRESENT) TO BE PER PMS 186C

2. BLACK (WHEN PRESENT) TO BE PER PMS PROCESS BLACK
3. WHITE (WHEN PRESENT) TO BE PER PMS WHITE

3. MASTER ARTWORK TO BE SUPPLIED BY MILWAUKEE ELECTRIC TOOL.
4. A PRINTER'S PROOF IS REQUIRED TO BE SUBMITTED TO MILWAUKEE FOR APPROVAL PRIOR TO PRODUCTION .

TITLE: CARTRIDGE INFORMATION STICKER

MAT’L

FINISH/

TREATMENT

COLOR

DWN BY

CHK BY

APP BY

DO NOT SCALE DRAWING

ALL DIMENSIONS IN MM

DWG NO.

SCALE

DATE

SHEET

1 OF 1

SEE NOTES

MILWAUKEE PART NUMBER: 10-20-1076

05/03/2011

K.Goers

REVISION

ECO

ISSUED DA

S.Schneider

9400XXXXX

33374

05/03/201

FINISHED LABEL

REFERENCE DIMENSIONS

98.4 mm

20.6 mm