Edimax Technology EW-7428HCn - Manual (Page 66)

66
Click “APPLY” to make changes take effect. The following message will appear:
Click “CONTINUE” to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click “APPLY” to restart the device and implement any changes. The device will
restart itself.
III-6-3. Power Saving
You can configure the operation of the LEDs and wireless capability of the
access point in order the conserve power.
LED ON/OFF Select “ON” or “OFF” to switch the LEDs on
or off accordingly.
Wireless
ON/OFF Select “ON” or “OFF” to switch the wireless
capability of the access point on or off
accordingly.
Click “APPLY” to make changes take effect. The following message will appear: