Edimax Technology EW-7428HCn - Manual (Page 11)

11
II. GETTING STARTED
1. Carefully remove the back panel cover by twisting it counter-clockwise. This
enables easier access to the LAN port and the power adapter.
2. Plug one end of an Ethernet cable into the device’s Ethernet port, plug the
other end into your computer’s Ethernet port.
3. Plug the power adapter into a wall socket, then connect it to the 5V DC
power port. Reattach the back panel cover, twisting it clockwise to secure it
into place.
4. The device will begin to initialize. After 30 seconds, the power LED will turn
on, which indicates the device has completed its initialization.
Note: Make sure that your computer is set as a
DHCP client. If you are unsure, please see APPENDIX
IV-1. Configuring your IP address to set your PC IP
to “Obtain an IP address automatically”.
5. Enclosed in the product box is an Access Key card to indicate device factory
default information, containing a URL to access the device’s browser-based
configuration interface, similar to the example below.
“Web browser access” is necessary information for you to login web-based
firmware.
“Wi-Fi Client access” is necessary information for your wireless client
device(for example your computer, tablet, smart phone) to connect to this
device.