Edimax Technology EW-7428HCn - Manual (Page 28)

28
same mode, and links any wired networks
connected to these two wireless access
points together. Only one access point can
be connected in this mode.
AP Bridge-Point to
Multi-Point Establishes a wireless connection with other
wireless access points using the same mode,
and links any wired networks connected to
these wireless access points together. Up to
4 access points can be connected in this
mode.
AP Bridge-WDS This mode is similar to “AP Bridge to
Multi-Point”, but the device is not in
bridge-dedicated mode, and will be able to
accept wireless clients while the device is
working as a wireless bridge.
Universal Repeater The device will act as a wireless range
extender that will help you to extend your
Wi-Fi network. The device acts as a client
and AP at the same time. It its client
function to connect to a root AP, and uses
its AP function to service wireless clients
within its coverage.
III-3-1. AP Mode
When in AP mode, this device acts as a bridge between IEEE 802.11b/g/n
wireless devices and a wired Ethernet network, and exchanges data between
them.
When you select AP Mode, the following appears: