Edimax Technology EW-7428HCn - Manual (Page 65)

65
Click “APPLY” to make changes take effect. The following message will appear:
Click “CONTINUE” to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click “APPLY” to restart the device and implement any changes. The device will
restart itself.
III-6-2. Time Setting
You can configure the time zone settings of your access point here. The date
and time of the device can be configured manually or can be synchronized
with a time server.
Time Zone Select the time zone of your country/
region. If your country/region is not listed,
please select another country/region whose
time zone is the same as yours.
Time Server
Address This access point supports NTP (Network
Time Protocol) for automatic time and date
setup. Choose a time server from the drop
down menu, or input the host name or IP
address of the IP server manually.
Daylight Savings If your country/region uses daylight saving
time, please check the “Enable Function”
box and select the start and end date.