Edimax Technology EW-7428HCn - Manual (Page 64)

64
Click “CONTINUE” to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click “APPLY” to restart the device and implement any changes. The device will
restart itself.
DHCP Server
The access point can be configured to act as a DHCP server for your network.
By default DHCP is disabled.
DHCP Server Select “Enabled” to enable DHCP server
functionality. Select “Disabled” to disable it,
in which case subsequent fields will be
grayed out.
Default Gateway Input the IP address of the default gateway
of your network here.
Domain Name
Server IP Input the IP address of the domain name
server (DNS).
Start IP Input the start address of the IP range.
End IP Input the end address of the IP range.
Domain Name Input the domain name for your network
(optional).
Lease Time Specify a lease time (the duration that every
computer can keep a specific IP address) of
every IP address assigned by the access
point.