Edimax Technology ER-1088 - Manual (Page 38)

http://my_domain_name.dyndns.org
ftp://my_domain_name.dyndns.org
This screen allows you to define your own Server types.
Figure 4-5: Virtual Server
Settings – Virtual Server
Virtual Server
Configuration • Enable – The enable checkbox is to Enable or Disable each Virtual
server as required.
• Server Name – Enter a suitable name for this server. (By default, 12
well-known virtual servers have been listed on the Custom Virtual
Server List)
• Protocol – Select the network protocol (TCP/UDP) used by this sever.
• IP Address – LAN, Enter the IP address of the server on your LAN
which is running the required Server software.
Each Host (server) should have a fixed IP address, or have a reserved
IP address. (See the Host IP section earlier in this Chapter for details
on reserving an IP address.)
Each Host (server) must be running the appropriate Server software
WAN – This selection allows this server to bind to any WAN port (1-8),
Page 34