Edimax Technology IC-1500 - Manual (Page 18)

16
Setting Wizard
Internet Camera Name
The default camera name is “IC1500Wg”. It is recommended to enter a meaningful
name for the camera.
IP Address
The wizard will auto setup an available IP Address to the camera. For example: if the
IP address of the network is 192.168.2.x, the wizard will search an unused IP Address
from 192.168.2.250 to 192.168.2.0 and assign the camera an available IP Address.
You are allowed to enter another IP Address to change the setting.
Subnet Mask
The wizard will auto search the Subnet Mask setting of the network and set the
camera in the same Subnet Mask.
You can enter another Subnet Mask to change the setting.
Gateway
The wizard will auto search the Gateway setting of the network and set the camera to
use the same Gateway.
You can enter another Gateway to change the setting.
Video Port It defines the video stream port. The default value is “4321”.
Cancel Click “Cancel” to stop wizard setting.
Finish Click “Finish” to complete the camera setting.
When you finish the camera setting, you can click “Ok” to run the “Camera Viewer” immediately or click “Cancel” to run
the “Camera Viewer” later.