Festool LEX 3 77-2-5 - Manual (Page 17)

LEX 3
17
GB
9 Service and maintenance
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at:
www.festool.com/Service
Use only original Festool spare parts!
Order No. at:
www.festool.com/Service
9.1 Vanes
We recommend replacing the vanes of the motor at
the following intervals:
– Lubricated operation: Approx. 2,000 h
– Non-lubricated operation: Approx. 500 h
9.2 Replacing the silencer
In order to maintain the power and performance of
the compressed air tool, replace the silencer on the
IAS hose systems at regular intervals.
9.3 Sanding pad brake
The rubber sleeve[5-1] brushes off the sanding pad
and prevents uncontrolled turning of the sanding
pad. This must be replaced if the braking effect de-
creases.
9.4 Cleaning the extraction channels
We recommend cleaning the extraction channels in
the machine roughly once a week (particularly if
sanding synthetic resin, in the case of wet sanding
and if sanding plaster) [5-2]using a small flat brush
or a cloth.
10 Accessories
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".
11 Environment
Do not dispose of the device together with domes-
tic waste! Dispose of machines, accessories and
packaging at an environmentally responsible recy-
cling centre. Observe the valid national regulations.
Information on REACh: www.festool.com/reach
12 EU Declaration of Conformity
We declare under sole responsibility that this prod-
uct complies with all the relevant requirements in
the following Directives, standards and normative
documents:
DIN EN ISO 11148-8 i.a.w. the provisions of 2006/
42/EC Directive.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
2013-06-20
WARNING
Risk of injury
 The machine should always be disconnected
from the compresses air supply before any work
is carried out on the machine.
 All maintenance and repair work which requires
the motor casing to be opened may only be car-
ried out by an authorised service centre.
EKAT
1
2 3 5
4
Compressed air eccentric sander Serial no.
LEX 3 77/2,5 496675
LEX 3 125/3 496890
LEX 3 125/5 496891
LEX 3 150/3 496886
LEX 3 150/5 496887
Year of CE mark: 2012
LEX 3 150/7 496888
Year of CE mark: 2013