3Com CommWorks 5210 - Manual (Page 42)

42 C HAPTER 2: C ONFIGURATION
5 Set Threshold Row Status to notinsservice.
6 Change the configuration as you need, refer to Table 8 , and click Set.
7 Set the Threshold Row Status to active.
The following figure shows the Threshold Parameter drop-down list.
Figure 18 Editing Threshold Parameters Window
8 Click Set.
9 If you changed the threshold parameters on the Gatekeeper, SIP Proxy Server,
or any of the Back-end Servers, you must restart the SNMP agent. Refer to
Restarting Other Entities in Chapter 4 for more information.
Threshold Traps IP Telephony Manager issues the following traps depending on the Threshold
event severity configured:
■
Threshold Warning
■
Threshold Critical
■
Threshold Informational
■
Threshold Warning Clear
■
Threshold Critical Clear
■
Threshold Informational Clear