3Com OFFICECONNECT 3C886 - Manual (Page 43)

TCP/IP Setup Using Windows 3.11 43
Figure 29 Network Group Box
4 From the Network Setup dialog box, click the Drivers button.
Figure 30 Network Setup Dialog Box
5 From the Network Drivers dialog box, click Add Protocol.
6 Select Unlisted or Update Protocol and then click OK.
7 From the Install Driver dialog box, enter the path to the MS _TCP directory.
For example, if you installed MS_TCP on your C: drive in a directory called
MS_TCP, you would enter C:\MS_TCP.
8 Select MS TCP/IP-32.X and then click OK to install.
9 After the installation is complete, click Close.
10 Click OK.
11 From the MS TCP/IP Configuration dialog box, check the Auto Configuration
check box and then click OK.
12 Restart your PC to allow the changes to take effect.