3Com OFFICECONNECT 3C886 - Manual (Page 42)

42 C HAPTER 4: S ETTING U P TCP/IP FOR W INDOWS AND M ACINTOSH
Figure 27 TCP/IP Dialog Box for Macintosh Computers
2 Select Ethernet from the Connect via drop down list box.
3 Most users should select Using DHCP Server from the Configure drop-down list
box, as most LANs utilize dynamic IP addressing. If this LAN uses static IP
addressing, select Manually and then enter the IP address.
TCP/IP Setup Using
Windows 3.11 If you are using Windows 3.11, a TCP/IP stack may not be provided as part of the
operating system. If you do not have a TCP/IP stack, you can use MS_TCP which is
provided on the 3Com Companion Programs CD-ROM.
Setting up TCP/IP using
MS_TCP
To set up MS_TCP, do the following.
1 Install MS_TCP, located on the 3Com Companion Programs CD-ROM, onto your
hard drive.
2 From the Program manager, click Network.
Figure 28 Program Manager Group Box
3 From the Network group box, click Network Setup.