Section 5. maintenance, 1 cleaning the air filter – 3M MP8740 User Manual

Page 17

™

Multimedia Projector MP8740

ENGLISH

5.1 Cleaning the Air Filter

✔ Note

Clean the air filter about every 50 hours.

1. Turn off the MAIN POWER switch of the projector and pull out power cord. Let cool for 20 minutes.

2. Remove the air filter from the bottom of projector. Unscrew two retaining screws (1) and pull down

and out (2) on the handle to free air cleaner door. Lift air filter door up and out (3) and set it aside.

3. Carefully remove foam air filter Screen (4) and clean foam screen and metal screen using a

vacuum cleaner.

4. Re-install the air filter and replace the air filter door.

✔ Note

If air flow is restricted due to dust accumulation on filter, the projector may shut down due to over heating.

8730-36A

Section 5: Maintenance

Figure 5.1 Remove Air Filter