4XEM IPCAMW45 - Manual (Page 40)

- 36 -
www.4XEM.com
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: \r\n
\r\n
where is
=\r\n
[]
Only the parameters that you set and are readable will be returned.
Example: Set the IP address of server to 192.168.0.123
Request:
http://myserver/cgi-bin/admin/setparam.cgi?Network_IPAddress=192.168.0.123
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n
Available parameters on the server
NOTE: The bold characters in table are the default value of each parameter.
Group: System
NAME VALUE
DESCRIPTION
hostname
(r/w) than 40 characters> host name of server
<Network Camera >
0 Do not turn off the led indicator ledoff
(r/w)
1 Turn off the led indicator