4XEM IPCAMW45 - Manual (Page 20)

- 16 -
www.4XEM.com
System Parameters
Host name: The text displays the title at the top of the main page.
Turn off the LED indicator: Check this option to shut off the LED on the rear. It can prevent
the camera’s operation being noticed.
Time zone: Adjust the time with that of the time-servers for local settings.
Keep current date and time: Click on this to reserve the current date and time of the
Network Camera. An internal real-time clock maintains the date and time even when the power
of the system is turned off.
Sync with computer time: Synchronizes the date and time of the Network Camera with the
local computer. The read-only date and time of the PC is displayed as updated.
Manual: Adjust the date and time according to what is entered by the Administrator. Notice the
format in the related fields while doing the entry.
Automatic: Synchronize with the NTP server over the Internet whenever the Network Camera
starts up. It will fail if the assigned time-server cannot be reached.
NTP server: Assign the IP address or domain name of the time-server. Leaving the text box
blank connects the Network Camera to the default time-servers.
Update interval: Select hourly, daily, weekly, or monthly update with the time on the NTP
server.
Digital input: Select High or Low to define normal status of the digital input.
Digital output: Select Grounded or Open to define normal status of the digital output.
Reset digital output: The check box enable the function of resetting digital output. When the
digital output is triggered, after the number time the digital output will reset into normal state.
Remember to click on
to immediately validate the changes. Otherwise, the correct time
will not be synchronized.