3M X90w - Manual (Page 23)

23
Operating
Temporarily blanking the screen
1. Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen
of input signal. Please refer to the BLANK item in SCREEN
menu
(
39).
To exit from the blank screen and return to the input signal screen, press the
BLANK button again.
Ɣ7KHSURMHFWRUDXWRPDWLFDOO\UHWXUQVWRWKHLQSXWVLJQDOVFUHHQZKHQRQHRI
the projector’s buttons or the remote control buttons is pressed or one of the
commands (except get commands) is transmitted to the control port.
BLANK LASER
NOTE • The sound is not connected with the blank screen function. If
QHFHVVDU\VHWWKHYROXPHRUPXWH¿UVW
© 3M 2006. 3M™ Digital Projector X90w