Xerox 3400 - Manual (Page 23)

User Guide 13
Using the Macintosh installer
Use the installer application to automatically install the PostScript
PPD onto your computer's hard disk.
1. Insert the Phaser 3400 printer's CD-ROM into your computer's
CD-ROM drive.
2. Double click the CD-ROM icon.
3. Double click the folder for your language.
4. Double click the Installer icon.
5. On the introductory screen, click the Continue button.
6. Read the installation notes, then click the Continue button.
7. In the Installer dialog box, click the Install button.
8. Either set up the printer in the Chooser or on your desktop (if your
computer is connected to the printer with a USB cable). Refer to
the following section for more information if using a USB cable.
Note
To print, you must also have the LaserWriter 8 printer driver
installed. If needed, run the LaserWriter 8 installer, which is
available on the printer CD-ROM.
Setting up the printer when using a USB cable
1. Locate the Desktop Printer Utility in the Apple Extras folder.
2. Double click the Desktop Printer Utility.
Folder Language
DE German
EN English
ES Spanish
FR French
IT Italian
PT Portuguese