Yamaha RX-V470 - Manual (Page 20)

20
CENTER MODE
+
DELAY
TIME
–
ŸPRO LOGIC–ENHANCED CNCT VIDEO
MONO MOVIE ROCK HALL
EFFECT – VOLUME +
ŸSURROUND
2
ŸPRO LOGIC– ENHANCED CNCT VIDEO
MONO MOVIE ROCK HALL
ŸSURROUND
÷ The PROGRAM button on the front panel can also be
used instead of the DSP program buttons on the
remote control transmitter. Turn on the EFFECT
button and then press the
™ or £ side of the
PROGRAM button so that the desired DSP program
indicator appears on the display. When the EFFECT
button is turned on, the previously selected delay
time and DSP program indicator appear on the
display.
÷ If desired, adjust the delay time and the output level of
each speaker. (For details, refer to the corresponding
descriptions on this page and the next page.)
Note
If you prefer to cancel the DSP mode, press the EFFECT
button. The sound will be the normal 2-channel stereo
without surround sound effect.
1
Play a source.
(Follow steps 1, 2, 3, 4, 5, and 6 shown in “PLAYING
A SOURCE” on page 13.)
2
Select the desired DSP program that is suitable for
the source.
Program
ŸPRO LOGIC
ENHANCED
CONCERT VIDEO
MONO MOVIE
ROCK CONCERT
CONCERT HALL
Delay time range
from 15 to 30 milliseconds
(Preset value: 20 milliseconds)
from 15 to 30 milliseconds
(Preset value: 20 milliseconds)
from 1 to 100 milliseconds
(Preset value: 25 milliseconds)
from 1 to 100 milliseconds
(Preset value: 25 milliseconds)
from 1 to 100 milliseconds
(Preset value: 15 milliseconds)
from 1 to 100 milliseconds
(Preset value: 30 milliseconds)
÷ By continuously pressing the DELAY TIME + or – control,
the value changes continuously.
However, the value stops changing momentarily at the
preset point.
Notes
÷ Adding too much delay will cause an unnatural effect with
some sources. Experiment with the DELAY TIME controls
to create the effect that you find most suitable.
÷ The values of the DELAY TIME controls you set the last
time will remain memorized even when the power of this
unit is off.
However, if the power plug cord is kept disconnected for
more than two weeks, these values will be invalid.
—
+
DELAY
TIME
DELAY
PRO LOGIC
NORMAL
ms Ÿ
\
Delay time
Delay time adjustment
÷ The delay time can be adjusted with the remote control
transmitter only.
You can adjust the time difference between the beginning
of the source sound and the beginning of the effect sound
with the DELAY TIME controls.
The delay time adjustment is effective with all programs.
By applying more or less delay, sound effects, background
noise, and ambient noise coming at you from the rear
speakers can be enhanced or subdued for extra effect.
To play a source with the digital sound
field processor